Self-prime greater than three feet. Hardened Bronze Gear Pump Rotors.
10,000 Hour Rated Dual Hybrid Ball Bearings. 10,000 Hour Rated Over-sized Brushes.
Highest Rated Temperature (class H or higher) Insulated Copper Motor Windings. Black Anodized Extruded Aluminum Bracket/Heatsink. Stainless Steel Pump Head Fasteners. 3/8 NPT Female Threaded Pump Head Ports.
Set of two 3/8 NPT -> AN Nickel-plated Adapters Included - Options are -6AN, -8AN, or -10AN Sizes. 6 lbs Total Weight, 3" Diameter Motor, - For the most weight/space-critical applications see our Exa-Pump® "Mini! Reversible Pump Flow via Power Polarity Reversal. Not designed for use as a fuel pump. Warrant void if 350F (175C) rated temperature is exceeded. Rated voltage may be exceeded by up to 35% ("12V" pump is compatible with 16V race setups). For 100% compatibility with 18V-24V set-ups on race vehicles, choose the 24V Exa-Pump®. Operating Current: 12 VDC version is. Do not remove or replace ANY fasteners. No other pump comes close. All the materials used in the engineering of this pump were chosen to support extreme duty at extreme temperatures - constantly. The Exa-Pump's® 2-3 GPM of open-flow (0-PSI) gives the ability to easily scavenge from any turbo type or configuration, including the full flow twin turbo set-ups, or serious supplemental engine oil and/or transmission/rear-end fluid circulation through external radiators. This is also enough flow for coolant circulation in air-water intercooler systems. And finally, these pumps can generate 50 psi minimum pressure at reduced flow-rates, thus can be used in divorced turbocharger oil supply pump applications as well especially when our adjustable pressure bypass valve is installed specifically for this purpose. Bronze spur gears create the toughest, most rugged pump head available. Gears are angle cut for quiet operation. All engine manufacturers use either gerotor or spur gears for their oil pump. Exa-Pump® uses the same ultra-reliable technology.10,000 Hour Rated Dual Ball Bearings. High temperatures drastically reduce these numbers further. This is a fundamental limit on pump life. Exa-Pump® uses a dual set of expensive 10,000-hour rated ball bearings.
Exa-Pump® engineers designed in over-size brushes to increase brush life to beyond 10,000 hours. The competitors have settled on cheap, commodity. Black Anodized Extruded Aluminum Heatsink and Bracket.
The newly designed heatsink and mounting bracket are now integrated into one very strong functional unit. The bracket/heatsink design allows the pump to be easily rotated to any position across 360 degrees for optimal port placement for any application. Nickel-plating serves as a tough, anti-corrosion barrier for the pump head. Grade 12.9, corrosion-proof stainless steel Allen fasteners are used exclusively for the pump head assembly.
3/8 NPT F Threaded Pump Head Ports. Industry standard port sizes used. Two AN->3/8NPT fittings included for convenience. 6AN, -8AN, or -10AN can be chosen.
High-temperature rated wiring to support extreme environments. Exa-pumps® use a strong steel bracket with rubber isolation mounts with an industry standard footprint for easy upgrading of existing systems. The pump head gears are precision, angle cut. The gears are sized to reduce the motor's RPM.This results in much quieter operation, with far less vibration than the competitor's. The pumps have a wide operating range of 0% to 125% (25% over) of rated (nominal) voltage. All specifications assume a nominal Voltage.
Current requirement for 12 VDC version is typically. The weight is 6 lbs.
A Totally New Standard is Set. Every detail in the Exa-Pump® design has been scrutinized and engineered for performance far exceeding any existing pump. The net result is a pump with 2x the performance and 10x the reliability of competitor's best offerings. The Exa-Pump® is the final statement in turbocharger electric scavenge pump technology. It is simply the best.Your address must be confirmed. Buyers who pay with unconfirmed addresses will not be accepted. We always look to satisfy our customers in whatever needs they may have.
Any product you return must be in the same condition you received it and in the original packaging. LET'S TAKE YOU TO THE. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts".The seller is "performanceworks" and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam.